There are a number of simple tests that you can carry out to get an idea of the plastic used for the manufacture of any given product. These tests are straightforward, requiring no special equipment.

Before entering the tests you must read and accept the safety precautions set out below.


IMPORTANT DISCLAIMER

Safety Precautions
  • The copper wire will get hot when heated in a flame. One end of the wire should held with tongs or pliers to avoid burns.
  • When undertaking the copper wire test DO NOT INHALE THE FUMES, these can be highly toxic. Work in a well ventilated area. It is advisable to wear protective goggles when undertaking this test.
  • Acetone is flammable and the vapours are considered toxic. Keep the top on the bottle when you're not using it and work in a well ventilated area. Avoid flames.


Please check the box below to confirm that you understand that these test may be dangerous and that undertaking them is done purely at your own risk

You must have a responsible adult present to supervise the test.
I confirm that I have read the above safety precautions and accept full liability while carrying out the tests.